On some of my listing there may be other paper layouts to choose from. There may be pictures of bobble heads in the pictures. Bobble heads Display Case, this item is made to look like a Dugout.
This is a customized piece. Meaning I can make this item for any MLB Team and or MLB.
This can be made for any other sport. You will see in my store there are a few for Football. This item is made to hang on a wall or it can be set on a table or shelf. The display case is made from 3/4 Pine wood for the most part. The Roof & Floor is made from 3/16 plywood.
The top lettering (The name of Team and or City) in most case is 1 7/8 inches high, depending on the length, down to 1 1/2 inches. The over all length is 22 inches giving me app 20 inches of cutting space.
In most cases I like to fill up the inside with logos. On a 3 logo display.
The inside end logos are app 5 inches high. The center logo is app 6 to 7 inches high. On a 2 logo display. The logos are app 6 inch 6 1/2 inches. The logos & lettering is cut out with a scroll saw.
The pieces are hand sanded and painted with Acrylic Paint and glued on to a backing board, 3/16 plywood. Only the surface of the logos are painted. It is finished off with four coats of Crystal Clear Enamel. This item is made from 3/4 pine wood & 3/16 plywood.
The Roof & Floor is 3/16 plywood. + or - a 1/4 inch. The over all case is 22 inches long x 13 1/2 inches high x 10 inches wide.
The top part of the case where is reads "the name of the team or city" is 3 1/4 inches high 22. The box is 8 x 10 1/2 x 22.
The inside box is 10 x 7 1/4 x 20 1/2. The Bench / back shelf is 2 1/4 high 3 1/2 wide 20 long (in most cases Dodgers is 1 1/2 high). The Floor inside is 9 1/4 x 20 1/2. The Roof is 8 1/4 x 22. The handrail is 3 1/2 x 20.I will give all hardware to hang on your wall. This item was made to hang on a wall but if you decide to set on a book shelf or table.
Then cut out the cardboard outline on the inside of the box lid to use as a pad to prevent scratches. A standard bobble head is 3 inches round & 7 inches high.This item can hold up to 35 bobble heads if you use the roof as a top shelf. (THIS WILL BE A TIGHT FIT).
In the pictures you will see I used CHEW CANS. A chew can is 2 1/2 inches so I spaced them out to show 3 inches of each. The inside of the dugout will hold app. Six on the bench / back shelf and 11 on the Floor. You also can put 20 on the top of the dugout.
EXTRA FEATHERS ARE ADDED (IF NOT IN THE MAIN TITLE). EXTRA FEATHERS To see other dugouts with sliding doors or stained look in my store.
Sliding doors 2 plexi-glass sliding door. Green Felt for the floor. The floor will be covered in green felt to give it a grassy look.
I don't have all MLB teams made, so if you want to see a paper layout for a team I don't have I will make you some layouts to choose from. These can also be made for other sports & teams.These items MUST BE INSURED. In 2017 they lost or damaged 9 orders from me. The weight of this item is 12 to 15 pounds depending on the dryness of the wood.
The weight of this item is app 13 1/2 pounds packed. My zip code is 17872. This item is made from Wood that is a Natural item made by Nature. Over time wood will try to obtain it's natural shape. I'm a wood worker with 35 years experiences.
I take the time to study the wood to prevent problems in the future. As of Dec 2019 I'm 57 years old and in good health. I live alone / widower. I work out of my home. My shop is my basement & kitchen.I'm a one man operator meaning I work alone. I been a wood worker for over 35 years.
I work 5 days a week app 14 to 16 hours a day. Weekends I don't work, I do my housework. It gets very busy here.
If you need your item in a timely manner let me know. In some cases I can move my work load around to fit your time frame. This is hand crafted and designed by me, Jimwood2007.
Most of my small items take under 8 hours / 3 days to make. (three days meaning time for the paints to dry) Larger items take up to 15 to 25 hours / a week to make. I'm a one man operator and at times I get over loaded with orders. If you need an item in a TIMELY MANNER let me know. All logos are airbrushed on / painted.I no longer cut the logos out. By painting the logos on the items look a lot better. The item "New York Yankees Bobble Head Display Case Handcrafted Pinewood with Red Logos" is in sale since Friday, March 6, 2020. This item is in the category "Sports Mem, Cards & Fan Shop\Fan Apparel & Souvenirs\Baseball-MLB". The seller is "jimwood2007" and is located in Shamokin, Pennsylvania. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay, Russian federation.